Sale!

1969

Key Points

  • OBD-II to DB15 Male Cable for TATA
  • Brand New & High Quality
  • Length: About 200cm
  • Weight : 153 gm
  • OBD-II Plug: 16-pin male to car
  • Mainly Used for diagnostic Tata Company Vehicles
LIMITED OFFER!

Description

V Connect Plus Cable for Tata Motors:

V Connect Plus Cable for Tata Motors.OBD Connector degree is an improvement over OBD-II in both capability and standardization. The OBDII Connector standard specifies the type of diagnostic connector and its pinout, the electrical signalling protocols available, and the messaging format. It also provides a candidate list of vehicle parameters to monitor along with how to encode the data for each. There is a pin in the connector that provides power for the scan tool from the vehicle battery, which eliminates the need to connect a scan tool to a power source separately.

Universal OBD2 Connector:

OBD2

That is your car telling you there is an issue. If you visit a mechanic, he will use an OBD2 scanner to diagnose the issue.

To do so, he will connect the OBD2 reader to the OBD2 16 pin connector near the steering wheel.

This lets him read OBD2 codes aka Diagnostic Trouble Codes (DTCs) to review and troubleshoot the issue.

V Connect Plus Cable for Tata Motors OBD2:

Pin Number Pin Name Description
1,3,8,9,11,12,13 Blank These pins are not standard and are vendor-specific. It  also not required for normal communication/interfacing
2 SAE J1850 Bus+ This protocol uses Variable Pulse Width and is normally used by GM vehicles. It also  Bus positive pin of the protocol.
10 SAE J1850 Bus- This protocol uses Variable Pulse Width and is normally used by GM vehicles.  It also  Bus negative pin of the protocol.
4,5 Ground The ground of complete system of the Car including chassis
6 ISO15765-4 CAN High It follows a 2-wire CAN protocol at 1Mbps speed. It also CAN high Pin
14 ISO15765-4 CAN Low It follows a 2-wire CAN protocol at 1Mbps speed. It also CAN low Pin
7 ISO 9141 – K Line It follows asynchronous serial communication protocol, It also Kline Pin
8 ISO 9141 – L Line It follows asynchronous serial communication protocol, It also L line Pin

Features

  • Brand new and high quality OBD-II to DB15 Male Diagnostic cable.
  • For connecting your diagnostic interface and your vehicle with OBD-II compliant
  • Length: About 200cm
  • Weight : 153gm
  • OBD-II Plug: 16-pin male to car
  • Mainly Used for diagnostic Tata Company Vehicles

PRICING:

Qty.

Unit Price

1-10pcs

1300 Rs/Pc

11-20pcs

1170 Rs/Pc

21-30pcs

1060 Rs/Pc

31-50pcs

940 Rs/Pc

>50pcs

800 Rs/Pc

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…