Description
kia obd Kia-2 obd diagnostic connector cable
Kia obd/Kia-2/diagnostic connector cable, Allows Four devices to be connected simultaneously, it also High-quality materials give the cable superior flexibility and durability. also Compatible with a diagnostic tool with a 16 pin socket. It is also DB9 female pin Cable( four pairs).
Universal for all cars with OBD-II Interface.
Features: Colour: Black. Easy to install. Item specifics: Warranty: NA. Condition: A brand-new, unused and undamaged item. Quality: As per Automobile Standard. Brand: MapOut.
kia obd diagnostic connector cable :
DB9 female pin Cable Four Pair to OBD-II Male improvement over OBD-II in both capability, and it also standardization.
DB9 female pin Cable Four Pair to OBD-II Male OBD2 Male OBDII Connector standard specifies the type of diagnostic connector and its pinout it also electrical signaling protocols available, in addition the messaging format.
It also provides a candidate list of vehicle parameters to monitor along with how to encode the data for each. First there is a pin in the connector that provides power for the scan tool from the vehicle battery, and it also eliminates the need to connect a scan tool to a power source separately.
Universal OBD2 Connector in DB9 female pin Cable Four Pair to OBD-II Male:
Female OBD-II connector on a car Female OBD Connector 90 connector pinout – front view The OBDII specification provides for a standardized hardware interface.Equally important female 16-pin (2×8) J1962 connector. Unlike the OBD-I connector, which was sometimes found, under the hood of the vehicle. Also OBD-II connector is required to be within 2 feet (0.61 m) of the steering wheel.
SAE J1962 defines the pinout of the connector as:
The amount of diagnostic information available via DB9 female pin Cable, it also Four Pair cable to OBD-II Male OBDII has varied widely since its introduction in the early 1980s versions of on-board vehicle computers.
That is your car telling you there is an issue. If you visit a mechanic, he will use an OBD2 scanner to diagnose the issue.
Further To do so, he will connect the OBD2 reader to the OBD2 16 pin connector near the steering wheel.
This lets him read OBD2 codes aka Diagnostic Trouble Codes (DTCs) to review it also troubleshoot the issue.
Features of Kia obd/Kia-2:
Brand new and high-quality OBD-II to 4 DB9 Female Diagnostic cable.
For connecting your diagnostic interface and your vehicle with OBD-II compliant
Length: About 200cm
Weight: 239 gm
OBD-II Plug: 16-pin male to car
Mainly Used for diagnostic OBD2 Male to DB9 Female Diagnostic Cable Engine company Vehicles
Cable core: 10 Core
In kia obd, Connector Pinout Configuration
| Pin Number | Pin Name | Description |
| 1,3,8,9,11,12,13 | Blank | These pins are not standard and are vendor-specific. It is also not required for normal communication/interfacing |
| 2 | SAE J1850 Bus+ | This protocol uses Variable Pulse Width and is normally used by GM vehicles. It also Bus a positive pin of the protocol. |
| 10 | SAE J1850 Bus- | given protocol uses Variable Pulse Width and is normally used by GM vehicles. This is the Bus negative pin of the protocol. |
| 4,5 | Ground | The ground of the complete system of the Car including the chassis |
| 6 | ISO15765-4 CAN High | follows a 2-wire CAN protocol at 1Mbps speed. It also CAN high Pin |
| 14 | ISO15765-4 CAN Low | follows a 2-wire CAN protocol at 1Mbps speed. It also CAN low the Pin |
| 7 | ISO 9141 – K Line | follows an asynchronous serial communication protocol. It also Kline Pin |
| 8 | ISO 9141 – L Line | It follows asynchronous serial communication protocol, It also L line Pin |
